About nothing and DIY in the middle of winter

22 06 2012

I haven’t written anything for sometime now. Nothing much has happened though I’ll have a go about writing it. Actually, quite a lot of nothing has been going on in Zimbabwe. I’ve heard of at least 2 Spar supermarkets that have closed their doors recently due to lack of trade. The small sawmill that operates off the same premises as my nursery is also on the verge of closing. They had a run-in with a union some time ago so paid off all their staff and now just employ them on a day-to-day basis as and when they have work. I got them to cut 1200m of battens for the greenhouse that we are recovering with plastic. We are not that busy either so are doing the maintenance that we ignored for so long in the dying days of the Zimbabwe dollar (LONG may it stay that way!). Actually this is traditionally a quiet time for us so I am not that concerned – yet.

I know that in the developed world there are specialist greenhouse covering and maintenance companies but that is not how we do things in Zimbabwe. If there’s a problem on the farm you get on and fix it yourself. ART Farm where I live has a fully fledged workshop that does all the on farm repairs and maintenance and on occasion I do use their skills. The senior mechanic is a pleasant fellow and I have used his help on the Land Cruiser after-hours on a Saturday. Though I have to admit (with head briefly bowed) that I thought replacing the oil seals on the half shafts would best be done professionally in town this week. Then I got the bill and thought that for $580 I should have had a go myself!

Building is not my forté but what the hell I gave it a go this week. OK, I supervised the builder who did the building. It’s nothing much, just a pit toilet known as Blair toilets in this part of the world after the government laboratory that many years ago developed the standard. It’s simplicity itself; a sort of square spiral wall (work it out!) over a squat hole in a concrete slab with a roof and vent pipe. There’s even a plan in the CFU (Commercial Farmers’ Union) handbook. Pretty basic stuff but it still required me to supervise the builder for the best part of the day while he got the plans wrong. It has taken him the last 3 days to do something that a skilled builder would have done in a day. At one stage I began to think that I should have got in a skilled builder and just paid but actually his building is OK for a farm builder and the skilled builder is “not reachable” according to the cell phone service provider. Which is a pity as we have some tobacco ponds to construct and it really does need accurate building skills. A previous builder “had a go” at some ponds a few years back and when I queried about why the walls were not visually level (no spirit level required to see this) he told me that it was not the walls that weren’t level it was the water in the ponds that wasn’t level! Harsh words were exchanged and I refuse to employ him. Maybe I’ll have to give it a go myself. I know that Tony has a dumpy level and I watched the skilled builder doing it just in case I needed the knowledge.

Maybe I’ll just go and employ a builder off the wall I see being built around a property on Harare drive. It’s certainly straight and level enough. And big. It’s at least 3m high and 300m long on just the road side – they have yet to build the other 3 sides but the bricks are there. That’s certainly someone with plenty of money and no taste. It’s been painted a light pink with mauve on the top. Mind you, I saw another like it (though much shorter on the Rolf Valley road) that was painted lavender and had a mirror in the electric gate. The lavender did not last; something much less brash now though the mirror is still there.

I suppose I should also have a go at repairing the coffee plunger pot at my elbow. Stainless steel no less and not cheap the spout is in the process of coming off and there is coffee leaking onto my desk. I could be catty and say it was made in China (which it was) and what does one expect except I do still have the box and it goes on about what a quality coffee plunger thing it is but it does claim to be designed in the UK and the English is genuine. Or I could just get on and have a go at fixing it. I have no idea how to solder stainless steel but I suppose I can find someone who does though I suspect it would be cheaper to buy another coffee pot. Though I did see some “cold solder” in an auto supplies outlet yesterday…

Advertisements

Actions

Information

One response

22 06 2012
mara4africatoalgarve

Hi, I’m glad you’re back to writing. Was wondering about the absence of posts.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s




%d bloggers like this: